Intelligent Weatherization

Pricing

Pricing


Quick links


Training fees for regularly offered courses at the INCAA training facility

The Indiana Community Action Association, Inc. (INCAA) has provided a wide range of training and technical support for weatherization professionals since 1978. INCAA’s services are available to all members of the building performance industry.

INCAA TRAINING FACILITY
1845 WEST 18TH STREET INDIANAPOLIS, IN
PHONE: (317) 638-4232

Weatherization Courses for 2017 Course Fee  Length
$225 per day
Retrofit Installer: Shell $1125 5 days
Introduction to Infrared Thermography $225 1 day
Zone Pressure Diagnostics $450 2 days
Daily Safety Test Out Procedures $225 1 day
Mobile Home Weatherization $450 2 days
High Performance Insulation $450 2 days
Crew Leader $450 2 days
Retrofit Installer: Mechanical $675 3 days
Carbon Monoxide and Combustion Analysis $225 1 day
Electric Furnace & Heat Pump Inspections $225 1 day
Oil Furnace Training $450 2 days
Boiler Inspections $450 2 days
Vent Systems & Combustion Air Requirements $225 1 days
Heating System Airflow Diagnostics $225 1 day
Energy Auditor $1125 5 days
Mechanical Systems for Auditors $450 2 days
CAZ Pressure Diagnostics $225 1 day
NEAT/MHEA Introduction $225 1 day
NEAT/MHEA Field Day $225 1 days
NEAT/MHEA Test-Out Day $225 1 days
Whole House Heat Load Calculations $225 1 day
Final Inspector/Quality Control Inspector $900 4 days
New Furnace Installation Inspections $225 1 day
Applying The ASHRAE 62.2 $225 1 day
DOE Health & Safety Policy $225 1 day
Lead Safe Weatherization $225 1 day
Moisture Assessment $225 1 day

Course fees do not apply if training is for Indiana Weatherization Program staff and contractors. 


Weatherization Training Descriptions for 2017

Retrofit Installer/Retrofit Installer– Shell

ISPQ-75

Effective January 1, 2012, The U. S. Department of Energy (DOE) requires that training for all technical personnel who work in the Weatherization Assistance Program (WAP) follow a national curriculum. The Retrofit Installer – Shell class is designed to comply with this mandate from DOE. It is appropriate for the personnel who have been referred to in Indiana as Building Technicians. These are the people who do the shell, or structural work; whose work activities are largely comprised of insulating and air sealing residential buildings. This is the core training course for the Shell Installer job classification.

At the end of this course there will be a written test.

NREL Job Task Analysis (JTA) are listings of the skills and knowledge that a practitioner needs in order to perform a given job safely and effectively.

Please click on this link to read NREL’s Job Task Analysis.


Introduction to Infrared Thermography

This one day workshop is designed to introduce weatherization staff to infrared thermography and to familiarize them with the specific equipment that INCAA has available for their use. Participants learn what infrared scanners do and how they can be utilized to evaluate weatherization work. The session involves hands-on use of the equipment as well as classroom instruction.


Zone Pressure Diagnostics

A field day will be added to this class for 2012.  The class is designed to provide auditors, installers and crew leaders with an overview of the latest ZPD protocols and to provide an opportunity to spend a day experimenting with them at a house.  We will utilize the latest tools and procedures to calculate total leakage path through secondary zones by the open-a-whole and open-a-door methods.


Daily Safety Test Out Procedures

This one-day class is intended for those who don’t necessarily need the full furnace or duct classes but need to know enough about house and furnace interactions to make sure the home is not left in a dangerous condition as Weatherization work is being performed. This class will cover topics from furnace vent system operational basics to the impact of duct leakage on forced air furnaces. There will be particular focus on open returns and the impact of duct repair. Participants will learn how to perform a “Worst Case” draft test of combustion appliances while using the DSTO form for guidance. This class is essential for Shell Technicians who want an answer to the question: “How do we properly test out the door”?


Mobile Home Weatherization

This two-day course is designed to address the unique characteristics of mobile homes. It has been updated to focus on the latest, most cost effective weatherization approaches, such as duct sealing and “belly blow”. This course is aimed at crew members as well as auditors.

Day 1: Weatherizing Mobile Homes
The classroom day of Mobile Home Weatherization is designed to provide auditors and installers with the knowledge required to effectively weatherize a mobile home. Topics include: what makes mobile homes different than site-built houses, a brief history of the weatherization approach to mobile homes, and detailed coverage of current mobile home measures. This segment also provides guidance about features that are unique to mobile homes including: rodent barriers, swag bellies, bow string trusses and package air conditioner ducts and dampers. This segment also provides detailed instruction on when and how to add insulation to mobile homes.

Day2 & 3: Field Days for Weatherizing Mobile Homes


 High Performance Insulation: Two-Part Spray Foam and High Density Cavity Insulation

A field day will be added to this class for 2012. The class is designed to provide auditors and installers with thorough knowledge of these two insulation products which have become very popular in Indiana’s Weatherization Program. Regarding spray foam, we will explore: the best applications for “two part”, alternative packaging and delivery systems, and safe practices. Topics relating to “dense pack” are: the details that make dense pack perform better than standard wall insulation, how to recognize and treat “key junctures” that are common in older buildings, and introduction to all of the relevant tools and techniques.


Crew Leader

ISPQ-75

Effective January 1, 2012, The U. S. Department of Energy (DOE) requires that training for all technical personnel who work in the Weatherization Assistance Program (WAP) follow a national curriculum. Crew Leader is a new job classification and INCAA’s Crew Leader class is designed to comply with this mandate from DOE. Initially, it is only appropriate for personnel who have attained certification as a Building Technician. As the new requirements are fully implemented, Retrofit Installer – Shell will eventually supplant the Building Technician job classification. The designated supervisor on each shell crew will be required to receive this training and eventually pass competency testing in thisjob classification.

This will be a two day class. Individual student progress will be assessed at the end of the class.
Primary topics covered in each of the classroom days are as follows:

  • How to develop a strategy to implement the work scope.
  • Successful communication with clients, crew personnel, auditors.
  • Dealing with pre-existing conditions and work order changes.
  • Documenting time and material.
  • Maintaining safe practices and a safe work site.
  • Test out and job finalization

At the end of this course there will be a written test.

NREL Job Task Analysis (JTA) are listings of the skills and knowledge that a practitioner needs in order to perform a given job safely and effectively.

Please click on this link to read NREL’s Job Task Analysis.


Retrofit Installer: Mechanical

This three day session covers inspection, testing and installation of mechanical system. Participants will become familiar with mechanical components and operational characteristics with the goal in mind being competent installation, testing and repair. This training is designed for the Technicians who may be performing safety and efficiency repairs or equipment replacements deemed necessary by the Weatherization Auditor. “Worst Case” draft and CO testing are featured in this course. This is a recommended prerequisite for some of the other mechanical courses.

At the end course participant must be a qualified heating installer or service technician currently working in the field or with documentable field experience.

At the end of this course there will be a written test.


Carbon Monoxide and Combustion Analysis

This one-day segment of the Advanced Heating Systems training is designed to provide Weatherization Auditors and Heating Technicians with the causes of carbon monoxide problems and the mitigation procedures. Also, learn how to operate a combustion analyzer to perform combustion analysis.


Electric Furnace & Heat Pump Inspections

This one day course designed for to give Weatherization Auditors and Heating Technicians the skills and knowledge necessary to inspect and evaluate electric furnaces and heat pump systems. We will cover sequence of operation and proper control set-up to gain the most efficiency from heat pump systems.

Prerequisites:


Oil Furnace Training

This two day session covers inspection and testing of vented oil fired heating appliances. Participants will become familiar with oil heating components and operational characteristics with the goal in mind being competent inspection, testing and repair. This session is designed for either Weatherization Auditors making inspections or Technicians providing repairs. Topic areas include: components and operation, oil furnace combustion, methods of measuring combustion efficiency and the improvement of combustion efficiency. Oil Furnace Inspection form is provided help facilitate inspection and documentation.


Boiler Inspections

This two day seminar is designed to give Weatherization Auditors and Heating Technicians a guide to a Health and Safety Inspection of gas boilers. Topics covered will be system identification, hot water vs. steam boilers, operational characteristics, system controls, safeties and limits, inspection considerations and maintenance issues. A new Boiler Inspection form will be introduced to help with the inspection process.


Vent Systems and Combustion Air Requirements

This one-day segment of the Advanced Heating Systems training is designed to provide Weatherization Auditors and Heating Technicians with the inspection process for vent systems, installation requirements and sizing procedures. Also, learn how to how to calculate combustion air requirements and solve related issues.


Heating System Airflow Diagnostics

This one-day segment of the Advanced Heating Systems training is designed to provide Weatherization Auditors and Heating Technicians with the process to calculate the required airflow and the tools necessary to measure airflow in a duct system. Learn how static pressure and duct sizing relate to the temperature rise of a furnace.


Energy Auditor

ISPQ-75

This class is intended to provide participants with the knowledge of the steps involved in the process of becoming an Energy Auditor in the DOE National Weatherization Program.  We will discuss the audit process from beginning to end interspersed with classroom activities to reinforce concepts and inspection procedures.  Participants are expected to have a knowledge base in place which will allow a viable transition from knowing to implementation.  The goal of this class is to take information learned in other classes and in the field and “put it all together” into a comprehensive audit process.  There are recommended pre-requisite classes before attending this session.

Pre-requisite classes 

Retrofit Installer Shell or Equivalent

Additional Recommended Class: (Not Required)

Mechanical Systems for Auditors

CAZ Pressure Diagnostics for Auditors and Technicians

At the end of this course,there will be a written test.

NREL Job Task Analyses (JTA) are listings of the skills and knowledge that a practitioner needs in order to perform a given job safely and effectively.

Please click on this link to read NREL’s Job Task Analysis.


Mechanical Systems for Auditors

This is an introductory class that will look at the different types of mechanical systems in Weatherization houses from an Auditor perspective. It will provide an overview of operational characteristics, components and testing considerations for gas, oil, solid fuel or electric furnaces, boilers, cook-stoves, water heaters, air conditioners and heat pumps. We will use the following forms as guidance for the inspection portion of the class: Gas Appliance Inspection, Oil Furnace, Boiler, Electric Furnace, Gas Range, Heat Pump and Wood Stove.


CAZ Pressure Diagnostics for Auditors and Heating Techs

This one-day class is intended to look at (“Worst Case”) pressure testing of the CAZ from a more complete perspective than what is required for shell technicians in the Daily Safety Test Out procedure. Health and Safety has always been our first consideration when performing CAZ pressure testing – we have been long familiar with the term “Worst Case” draft testing. But, there are also building durability, IAQ, comfort and energy efficiency issues that we must consider. In this class, we will look at concepts and causes of pressure problems along with testing procedures and test equipment. Participants will be challenged to interpret pressure diagnostic test results and identify appropriate repairs to make the building work in all respects. This class is geared toward Auditors and Technicians who are responsible for performing CAZ pressure diagnostics and affecting repairs.


Introduction To NEAT/MHEA Software

This one-day class is intended to help Weatherization program staff get up and running with NEAT/MHEA v8.5. Indiana’s Wx Measures Priority List is based on NEAT/MHEA and there are many cases when it would be advantageous for an auditor to run NEAT/MHEA on individual homes. This new version of NEAT/MHEA also contains appliance data bases for refrigerators and water heaters, and many more upgrades.


NEAT/MHEA Field Day

The NEAT/MHEA Field Day is for those users who have completed the introductory class and are ready to experience a field data collection exercise. In the field visit Trainees visit a field house to collect client information and gather appropriate house data for audit input. Trainees will then input collected data and generate a recommended measures report using their local agency libraries. The recommended measure reports will be compared and contrasted among the various agencies represented.


NEAT/MHEA Test-Out Day

This third day in the NEAT/MHEA sequence is for those users to demonstrate their audit input capabilities and verify their understanding of Indiana’s procedures when more challenging circumstances exist. Specific instructions will be given for how to input the ‘below the floor’ information, the latest math for handling efficiencies for furnace replacement analysis, and what specific items inside of NEAT/MHEA are to be turned on and what is to be turned off. Trainees will be given three exercises to input into NEAT/MHEA. These exercises will demonstrate the user’s knowledge, skills and abilities of the entire NEAT/MHEA process. Trainees must test out to be on IHCDA’s approved user list.


Whole House Heat Load Calculations

This one day course covers the methods, skills and inspection techniques Building Analysts need to calculate whole house heat load. This course will follow the ACCA Manual J heat loss procedure, utilize Blower Door air leakage information to determine heat loss associated with infiltration, and account for heat loss associated with air-sealed duct systems. Detailed building information of post-weatherization conditions are input into an Excel spreadsheet to determine a realistic post-weatherization heating load on the building. This heating load is then used to help select the most appropriate size of replacement furnace.


Quality Control Inspector/Final Inspector

ISPQ-75

At the root of every successful completion is a comprehensive and accurate evaluation of the entire Weatherization process. From the audit, to the implementation of the work scope, and all the way through the interim and final inspection, it’s all in the details.

This four day course will detail the diagnostics, attention to detail, and the expectations of a quality Weatherization interim and final inspection.

The first two days of this course will detail all the diagnostic procedures for shell, mechanical, and health and safety, as well as look at the appropriateness of audit procedures and work scope effectiveness. We will explore ways to evaluate all aspects of the Weatherization process looking for opportunity to improve our product.

Day three will be a field day performing an Interim Inspection and providing a site visit for a crew in progress.

Day four will be a field day performing a Final Inspection on recently completed weatherization work. We will identify what work meets expectations and where improvements are necessary. We will detail how to proceed with the need for additional work.

There will be a written test at the end of day four followed by a Field Skills Assessment for final completion of this course.

NREL Job Task Analysis (JTA) are listings of the skills and knowledge that a practitioner needs in order to perform a given job safely and effectively.

Please click on this link to read NREL’s Job Task Analysis.


New Furnace Installation Inspections

This training is designed to provide Weatherization Auditors and Heating Technicians with the Indiana New Furnace Installation Inspection Procedure and will focus on filling out the New Furnace Installation Inspection Form.


Applying The ASHRAE 62.2 Ventilation Strategy

For an extended period of time, Indiana’s Weatherization Program has been following the ASHRAE 62-89 ventilation strategy as a guideline for building tightness and determining a ‘Minimum Ventilation Requirement’. ASHRAE has since developed a new strategy called the ASHRAE 62.2 that gives partial credit for infiltration and exfiltration as a ventilation strategy, where the 62-89 before it had given full credit. Beginning January 2012, the Weatherization Program requires full implementation of the ASHRAE 62.2. This will change how we address the MVR and assess ventilation.

This course will cover the background behind developing the 62.2, how it applies to retrofit work, and what energy auditors need to know regarding equipment performance, sizing and selection criteria. We will demonstrate the INCAA 62.2 Spreadsheet to make processing this information a breeze.


 DOE Weatherization Health & Safety Policy

In 2011, DOE issued a new Weatherization Program Notice (11-06) in an attempt to provide clearer guidance for Health and Safety issues that we discover in houses we weatherize.  This guidance tells us what is allowable and what is not allowable….it all boils down to the State Plan.  We will detail the WPN-11-06 and then find what the Indiana State Plan says.  From there, we can strategize how to work through issues so we can produce “Healthy Homes”.


Lead Safe Weatherization

Lead Safe Weatherization will be part lecture and part hands-on. The hands-on portion will demonstrate typical Weatherization measures where lead safety is needed. There is a study period and a written test at the end of the day. This course is NOT a Lead Renovator course and does NOT fulfill the Lead Renovator requirement. Rather, this course will identify practices that workers must implement to provide lead safety in the workplace for themselves as well as the occupants of the home.


 Moisture Assessment

The Moisture Assessment class will help technicians and auditors identify the conditions that promote mold growth. We will identify treatment options for less extensive mold conditions and best Weatherization practices to prevent mold growth. We will discuss health aspects for both workers and clients.

Mold is supposedly everywhere, but where is the mold that I need to be concerned about in regards to performing Weatherization? What levels of mold are of relatively minimal concern and easily cleanable? What levels and locations are significant enough that it’s best to delay Weatherization? Where do we draw the line? When are conditions significant enough for a ‘walk away’?


Custom-designed training programs

The INCAA Training Facility also provides a wide range of custom designed training programs. We can build what you need and deliver it at the INCAA Training Facility, and we are also available to bring training to your location. Contact Steve Nall, Technical Team Leader for information regarding a custom designed training program.


BPI Test Center Pricing

As a Building Performance Institute (BPI) Test Center, Indiana Community Action Association‘s  (InCAA’s) Intelligent Weatherization training center is authorized to administer exams; provide proctors, equipment and facilities for exams; and submit exam results to BPI. We are committed to upholding BPI’s Test Center values of “consistency, fairness and impartiality to ensure a qualified home performance workforce.”

You may participate in BPI testing at InCAA whether  you have undergone training at InCAA’s Intelligent Weatherization training center or another training center.

Pricing for BPI Testing

  • $350 written exam
  • $600 field exam

For group discounts, please contact Steve Nall via email or phone (toll-free) at (800) 382-9895.